Programmable rotary encoder GEL 2444
Bearingless encoder with SIN/COS or TTL interface
- Maintenance and wear-free
- Low temperature drift and high signal quality
- Highest immunity to interference due to fully screened metal housing
- Records the minimum temperature, maximum temperature and rotational speed histogram
- It can be calibrated automatically using the mobile service unit
- For target wheels with 10 mm and 12 mm thickness
Product details
| Technical data | Rotary encoder GEL 2444 | |
|---|---|---|
| Field of application | Machine tool, general mechanical engineering | |
| Module | 0.3 and 0.5 | |
| Output level 2444D | TTL / RS422 (rotational speed histogram) | |
| Output signal 2444D | two square-wave signals offset by 90° and their inverse signals, | |
| Output level 2444K | 1 Vpp differential signal | |
| Output signal 2444K | two sinusoidal signals offset by 90° and their inverse signals, short-circuit-proof; option: reference pulse | |
| Output level 2444T | TTL / RS422 | |
| Output signal 2444T | two square-wave signals offset by 90° and their inverse signals, | |
| Outputs signals | serial communication, various digital protocols possible | |
| Temperature range | -30 °C ... +85 °C | |
| Protection class | IP 68 | |
| Output frequency | 0 … 200 kHz at 1 Vpp | |
Downloads
| Brochures and Technical information |
|---|
| Solution Catalog MiniCODER (EN) |
| Technical information GEL 2444 (EN) |
| Technical information GEL 244XM (EN) |
| Operating instructions |
|---|
| Operating instructions GEL 2444 (DE/EN) |
| Product information GEL 2444 (DE/EN) |
| Declarations |
|---|
| Declaration of conformity E1 (DE/EN) |
Explanations
| Signal pattern | Optional extras* | Waveform | Reference mark | Note |
|---|---|---|---|---|
| D | 1 / 2 / 4 / 8 / A / B C / D / G | digital | M / N / Z | interpolation factor |
| K | 1 | analogue | - / M / N / Z | without amplitude regulation |
| R | analogue | - / M / N / Z | with amplitude regulations | |
| P | digital | - / M / N / Z | configurable | |
| T | 1 / 2 / 4 / 8 / A / B / C / D / G | digital | - / M / N / Z | interpolation factor |
*You will find the explanation for this special equipment here.
Overview of functions
| GEL 2444 | GEL 211 | ||||
|---|---|---|---|---|---|
Signal pattern | Reference mark | Optional extras | Signal optimisation | Signal check | Rotational speed histogram |
| K | M / N / Z | P | yes | yes | yes |
| K | - | P | yes | yes | no |
| K | M / N / Z | 1 / R | no | yes | no |
| K | - | 1 / R | no | yes | no |
| T | M / N / Z | 1 / 2 / 4 / 8 / A / B / C / D / G | no | no | no |
| T | - | 1 / 2 / 4 / 8 / A / B / C / D / G | no | no | no |
| D | M / N / Z | 1 / 2 / 4 / 8 / A / B / C / D / G | no | no | yes |
The right service unit
Stp-files
If you need stp data, then send an e-mail with the article no. to info@lenord.de.
